0.5m³per hour Oil Water Separator Manufacturer

0.5m³per hour Oil Water Separator Manufacturer

The separator adopts three-stage oil filtering method. Bilge water is pumped by the bilge water pump into the first-stage oil-filtering room, where the first-stage separation is performed using the specific gravity difference of oil and water and the floating oil is separated from the water through the method of gravity. After the first-stage separation, the bilge water still contains small oil particles of diameter ≥0.5μ(i.e. emulsified oil), which are coalesced together (thus become bigger) through the coalescer in the second-stage oil-filtering room, and then be separated and float to the surface. Bilge water satisfying the discharge standard through the second-stage treatment will be directly discharged overboard. If the bilge water contains too much emulsified oil, it still fails to meet the discharge standard after the second-stage treatment, then the third-stage dialysis apparatus will be put into operation automatically to enable the bilge water to meet the discharge standard. The separated dirty oil is collected in the top of oil-filtering room. When the collected dirty oil reaches certain amount, it will be automatically discharged to the dirty oil tank

Technical Specifications

Drawing